Winters are here, and you would not want your hot water system to break down just when you need it the most. Not having hot water in the shower or the sink can be a huge inconvenience and can have a significant impact on the level of comfort and convenience in a household. Having no hot water can make a big difference in your daily life. Regular maintenance and checking on your hot water system Adelaide twice a year can help drastically minimise the chances of catastrophic failures and emergency hot water Adelaide plumber calls. If your hot water system has stopped working, you may want to check the most common reasons listed down in this post to identify the issue. For the best guidance to deal with these matters in the right way we recommend contacting your trusted hot water plumber to find the underlying cause of the issue:
The 6 Most Common Hot Water System Problems
#1 Faulty Temperature Valve
A tempering valve or temperature valve is a safety valve that is set to a temperature to blend hot water with cold water. It prevents scalding burns by perfectly mixing water to give you comfortable hot water which is 50 degrees. With use and over time the tempering valve can become faulty and not mix hot water with cold water properly. A tempering valve should be checked to see if it’s working perfectly. We recommend relying on a licensed plumber to replace the valve.
#2 Water Leaks
Water leaks are the most common type of hot water system issue most homeowners face. Most hot water systems start to leak eventually as the water action will slowly corrode your tank and create cracks that will start to leak. If the leak is coming from the top of your tank, this could be a sign that your water connections are loose and if the leak is at the bottom of the tank it could be because of condensation. Water leaks should always be rectified on priority and it’s highly advisable to contact your hot water plumber as soon as possible to rule out any major faults.
#3 No Hot Water
If there is no hot water at all it could be because of failed heating elements, faulty electric connection for electric hot water systems, no pilot light or faulty gas connection for gas hot water systems.
#4 Bad or Strange Smelling Hot Water
A build-up of bacteria in the tank causes strange smelling hot water from your taps. Hot temperature settings can kill any bacteria in your hot water tank but be extra cautious of doing this as extremely hot water can cause serious burn injuries. If you are not confident carrying out any of these tasks then consult a hot water plumber for any assistance and repair work with your hot water system. Also, if the unpleasant smell problem persists then you may need to have your tank cleaned by a professional plumber.
#5 Tank Takes Too Long to Reheat
If it feels like your hot water system takes too long to reheat, then your thermostat could be set too low, or you could also have a problem with your gas connection, such as poor gas pressure. However, in many cases, a hot water system taking too long to reheat is simply a problem with low capacity for your hot water needs. If your tank doesn’t get enough time to heat the water then you will end up with lukewarm water. Chat with a local plumber to discuss your hot water situation.
#6 Your Hot Water System is Old
Like any other household appliance, hot water systems also have a lifespan and after 10-12 years you can expect to see a noticeable decrease in performance before it breaks down completely. Deciding on the right new hot water system can be a daunting task for any homeowner. Let our hot water plumbers walk you through the different options that best suit your household needs and budget. Count on our plumbing services and hot water expertise for new hot water system installation.
Trust the Best!
At Anytime Plumbing Adelaide we have in-depth knowledge and experience in dealing with all makes and models of hot water systems. Call us today to discuss your hot water system servicing, repair or replacement needs. We look forward to working with you.
